• Run FC IO with Sanblaze
  • 1.create pool
    • a.create by GUI
  • b.create by uemcli
  • 2.create lun
    • a.create by GUI
    • b.create by uemcli
  • 3.create host
    • a.create by GUI
    • b.create by uemcli
  • 4.setup host configuration

Run FC IO with Sanblaze

1.create pool

a.create by GUI

b.create by uemcli

uemcli -u admin -p <Your Password> -d <The array's Mgmt IP Address> /stor/config/pool create -name pool_test_1 -storProfile profile_23 -diskGroup dg_18 -drivesNumber 6

2.create lun

a.create by GUI

Block - LUNs: Click “create” buttom to create a LUN

b.create by uemcli

uemcli -u admin -p <Your Password> -d <The array's Mgmt IP Address> /stor/prov/luns/lun create -name lun_test_1 -pool pool_test_1 -size 10GB -thin yes

3.create host

a.create by GUI

b.create by uemcli

uemcli -u admin -p <Your Password> -d <The array's Mgmt IP Address> /remote/host create –name linux_host_1 –type host –addr 10.244.192.80 -osType Linux

4.setup host configuration

1. 添加已创建的lun

2. 添加initiators

   

3. initiator的个数及信息在SANBlaze上创建并查看

   

4. 如果网络没有问题，Initiator Paths会自动出现

备注：SANBlaze可以模拟initiator和target,SFP用QLogic厂商的